February 20, 2014

Create Better Component Surface Finishes with Lapping Compounds

Lapping is a machining technique that is used to produce precision finishes on machined parts. Lapping can be used to produce a very flat surface, flat lapping, or to produce good fitment between two mating components, i.e. gear teeth, shaft and bushing, shaft and bearing, piston and cylinder, etc.. Timesaver Lapping Compounds are typically used in precision fitment between mating components as it breaks down too quickly to be an effective medium in flat lapping procedures. The abrasives in Timesaver Lapping Compounds are designed to produce a precision finish and fitment between two components without charging into the metal or continuing to cut.
February 10, 2014

Uses of Tungsten Disulfide in Various Industrial Applications

Tungsten Disulfide, also known as WS2, offers superior lubrication and coating abilities. It is known for its strength and its durability. So, it is no surprise that WS2 is the most popular choice of lubricant in a variety of industries.
December 24, 2013

Micro Surface Corporation Gearing up to Celebrate Christmas and Welcome 2014

Time flies by in the blink of an eye. As the frosty winter knocks at the door, we are busy searching for our warm coats to wear. The much-awaited Christmas is once again here and we are all set to welcome a brand new year with new hopes, resolutions and aspirations. We, at Micro Surface Corporation are also gearing up to celebrate Christmas and welcome 2014 with a renewed zeal and vision. As we remember 2013, it has been a year full achievements and accomplishments.
October 24, 2013

Things You Should Ask Before Using Molybdenum Disulfide

At Micro Surface Corporation Inc, our mission is to address and solve issues related to wear and corrosion faced by industries worldwide. Our solid film lubricants are our answer to this general problem. Our range of solid film lubricants that are specially engineered using molybdenum disulfide (MoS2) is used between two surfaces in relative motion for the purpose of lowering friction or reducing wear.
October 24, 2013

Dry Film Lubricants for Better Process Efficiencies

Welcome to Micro Surface Corporation—the most trusted source for dry film lubricants for industries worldwide. We are a leader in the application of Tungsten Disulfide (WS2) per Process SL-39 and Molybdenum Disulfide (MoS2) in accordance with MIL-PRF-46010 and AS5272 and similar to AMS2526.
September 25, 2013

Dry Film Lubricants by Micro Surface Corporation

Micro Surface Corporation is a leader in the application of dry film lubricants. They are also known as solid film lubricants that are employed between two surfaces for the purpose of reducing wear, lowering friction and preventing corrosion.They are typically utilized in adverse environments where specific hydrocarbon based lubricants such as grease and oil are not effective. These lubricants can also be used for metal wear protection in certain applications.

Microsurface Corporation is open for business, though at a limited capacity

The US Department of Homeland Security has deemed certain types of businesses as “essential” businesses. Microsurface Corporation is one of the businesses deemed as “essential” based on supporting customers in “Critical Infrastructure Sectors” as determined by the federal government. These sectors include: Critical Manufacturing; Government Facilities; Nuclear Reactors, Materials, and Waste; Defense Industrial Base; and Communications.

We are committed to the safety and health of our employees, our community, and our customers. All office and supporting staff will continue to work from home and shelter in place. Those who are required to come into our facility will make all possible efforts minimize to contact with one another while they work through this pandemic.

To that end, please keep in mind that we are currently running with limited staff and shorter hours. For fastest response please contact us directly by email at info@ws2coating.com or call (408) 723-0700 to check current status.

Our staff is working diligently to process all current or previously delayed orders and move forward with new orders.

Thank you for your patience and understanding during this difficult time.
-Brian Geranen, President